In the last 10 years, V1 VoIP resellers are seeing their small and medium size business customers continue to switch to Hosted PBX service. Like most new technology, when this service was first offered some of the kinks needed to be ironed out. If you have a customer on an older PBX service, here is our list of a few ways to make their service better.
Inadequate or Mis-Programmed Router
If there is one component in the business VoIP installation process that creates problems, it’s the router. Many older routers will not support VoIP, while others that claim to do so do a piss poor job of it. Don’t forget, when routers are installed make sure it’s by someone with knowledge about VoIP so it’s done correctly.
Inadequate Internet Connection For Bandwidth
In order to have proper PBX service you must have a data circuit that meets certain criteria. Take a peak usage time and measure latency, packet loss and jitter.
Quality of Service (QoS) is the prioritization of voice over data on a given circuit. QoS throttles back the data speed to allocate the proper bandwidth to voice so that quality is not impacted. QoS can be provided by the data circuit carrier or done through a V1 VoIP gateway.
Poor SIP Telephones
The vast majority of SIP telephones are of business quality, but a substandard one will make your PBX service seem awful. Make sure your customer has the proper SIP phones to make calls. Also don’t forget the data cable to run to every location where you wish to have a phone.
Outdaated Ethernet Switches
Local area network and Ethernet switch problems are rare. However older and out of date Ethernet switches that have been daisy-chained together will need to replaced.
V1 VoIP walks resellers through all the things they need to successfully deploy a virtual PBX for their customers, but the after sales support to ensure smooth installation and reliable service. Contact V1 VoIP today to learn more.